FORD 4D immo emulator

[Canfan]

Problem software says error wrong com Port.
But the K-Line interface is on com port 1
any one now the problem?

[Canfan]

i found the fault the 4D emulator software need a USB to serial interface with k-line.
I used the computer's internal serial com port with a Kline adapter that the software does not recognize

[Girts]

That happens.
Not a fault in software, problem is with your hardware drivers, hardware conflicts or hardware itself.
Standard baud rates used here, nothing exceptional.

[Canfan]

Hello,
the emulator can now be used without any problems, but if I enter the key data in the emulator, but the imo go not off
pssword: 03
users: 00
ID: A8047b01
Key: 0000000000
Seed: 0000000000
resp: 00000000
these are the key data that I enter directly.

[Girts]

Key 0000000000 ?
Seriously?

[Canfan]

I have a tool to read the key and it told me that

[Girts]

P4 (KEY PASSWORD) is write only, it is not readable using standard transponder machines.
Although it can be calculated...

[Canfan]

I have test it with another Key with engine control unit
But the imo go not off
Key data from engine controal unit
pssword: 03
users: 00
ID: EFEFD201
Key: CDAD024781

[Canfan]

found the error
the diagnostic software gave the wrong key
the correct key is 814702ADCD