PCFprog
-
matej505
- Posts: 2
- Joined: 12 Apr 2020, 15:43
Re: PCFprog
Я подключаю программатор к плате PSA E33CI009, к сожалению, каждый раз, когда возникает ошибка соединения, что это может быть?
- Girts
- Posts: 2666
- Joined: 24 Mar 2011, 22:06
- Has thanked: 543 times
- Been thanked: 1894 times
- Contact:
-
vovako
- Posts: 8
- Joined: 26 Nov 2012, 17:47
Re: PCFprog
7941 конфиг 8000 определяется танго как 7941. Можно ли его заставить определяться как 7936? Спасибо
- Girts
- Posts: 2666
- Joined: 24 Mar 2011, 22:06
- Has thanked: 543 times
- Been thanked: 1894 times
- Contact:
Re: PCFprog
vovako wrote:7941 конфиг 8000 определяется танго как 7941. Можно ли его заставить определяться как 7936? Спасибо
TANGO их определяет по ID.
Дальше попробуй догадатся сам...

Народ давно требует красной кнопки!
- solitaire
- Posts: 349
- Joined: 11 Apr 2011, 07:19
- Location: lithuania, jonava
- Has thanked: 49 times
- Been thanked: 184 times
- Contact:
Re: PCFprog
vovako wrote:7941 конфиг 8000 определяется танго как 7941. Можно ли его заставить определяться как 7936? Спасибо
думаю вам нужен вот такой девайс:
https://cartools.lv/Shop/product_info.p ... ucts_id=94
tango определять 41 как 36 не станет, но много задачь им можно решить

- Diagramm
- Posts: 1
- Joined: 22 May 2020, 08:44
- Daniulis
- Posts: 2160
- Joined: 21 Oct 2011, 19:12
- Location: Ireland
- Has thanked: 339 times
- Been thanked: 879 times
Re: PCFprog
Diagramm wrote:подскажите для какой цели этот эмуль нужен?
Для всяких интересных нужд
https://cartools.lv/Robin/HITAG/page10.html
Люди злы в той мере, в какой несчастны.
-
vovako
- Posts: 8
- Joined: 26 Nov 2012, 17:47
Re: PCFprog
Girts wrote:vovako wrote:7941 конфиг 8000 определяется танго как 7941. Можно ли его заставить определяться как 7936? Спасибо
TANGO их определяет по ID.
Дальше попробуй догадатся сам...
Спасибо, догадался.
-
gnombom
- Posts: 8
- Joined: 05 Mar 2014, 16:11
- Location: Новосибирск
- Contact:
Re: PCFprog
jevgensolo wrote:antuk wrote:jevgensolo wrote:Как-то так...
Это от куда , если не секрет ?Busyman wrote:А дампом под них кто то может поделиться ?
Аналогичная просьба
Это из хелпа к KEYDIY. Дампик он подкидывает онлайн через приложение в телефоне, как стянуть - ХЗ.
я на бмв ключ китайский на 7961 дамп стягивал с KEYDIY все легко))) нужен только ключ который обновить надо.
-
wesk18
- Posts: 2
- Joined: 18 Oct 2020, 01:14
- Girts
- Posts: 2666
- Joined: 24 Mar 2011, 22:06
- Has thanked: 543 times
- Been thanked: 1894 times
- Contact:
Re: PCFprog
wesk18 wrote:Will this work for chinese chips (26A0700)??
RF transmitter?
Nobody can't. No code inside.
Народ давно требует красной кнопки!
-
wesk18
- Posts: 2
- Joined: 18 Oct 2020, 01:14
Re: PCFprog
Girts wrote:wesk18 wrote:Will this work for chinese chips (26A0700)??
RF transmitter?
Nobody can't. No code inside.
Yes its a bmw key comes with this cheap chinese chip
-
Nyckelakuten
- Posts: 2
- Joined: 09 Jan 2021, 21:31
- Has thanked: 1 time
Re: PCFprog
Hi, can somebody help me with wiring diagram and file for Volvo Remote 5WK49264?
If I buy a new genuine Volvo Remote 5WK49264, can I read it and create virgin file from it?
Very good tool! I have renewed 5st Audi 8T0959754D_868 keys with no problem!! =)
Thanx
If I buy a new genuine Volvo Remote 5WK49264, can I read it and create virgin file from it?
Very good tool! I have renewed 5st Audi 8T0959754D_868 keys with no problem!! =)
Thanx
- solitaire
- Posts: 349
- Joined: 11 Apr 2011, 07:19
- Location: lithuania, jonava
- Has thanked: 49 times
- Been thanked: 184 times
- Contact:
Re: PCFprog
Nyckelakuten wrote:....If I buy a new genuine Volvo Remote 5WK49264, can I read it and create virgin file from it?....
No
-
Nyckelakuten
- Posts: 2
- Joined: 09 Jan 2021, 21:31
- Has thanked: 1 time
-
marwo
- Posts: 1
- Joined: 18 Feb 2021, 20:19
- maris
- Posts: 1
- Joined: 08 Nov 2022, 13:03
- Location: Rīga
- Contact:
Re: PCFprog
Hi!
When connecting pcfprog to the laptop, it does not detect the device. In pcf programmer, it says "no device". I tried to connect to Windows 10 and Windows 11. Does anyone have any ideas why it doesn't work?
Thanks!
When connecting pcfprog to the laptop, it does not detect the device. In pcf programmer, it says "no device". I tried to connect to Windows 10 and Windows 11. Does anyone have any ideas why it doesn't work?
Thanks!
- Girts
- Posts: 2666
- Joined: 24 Mar 2011, 22:06
- Has thanked: 543 times
- Been thanked: 1894 times
- Contact:
Re: PCFprog
Possible causes -
1) no drivers installed on PC. You can download them from https://ftdichip.com/drivers/
2) if number of installed COM ports exceed 16, there may be problems (Windows isn't working correctly, ask Bill Gates why!)
3) disconnect everything except PCFprog from USB ports and try again.
1) no drivers installed on PC. You can download them from https://ftdichip.com/drivers/
2) if number of installed COM ports exceed 16, there may be problems (Windows isn't working correctly, ask Bill Gates why!)
3) disconnect everything except PCFprog from USB ports and try again.
Народ давно требует красной кнопки!
-
shrus
- Posts: 3
- Joined: 07 Nov 2022, 07:58
Re: PCFprog
Good afternoon. Can you tell me if your device can make a cli from a Mini Cooper 2007? The board has an inscription 233.441.011-02
Re: PCFprog
В поисках дампа 7941 на Astra H
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 9 guests

